Sediment hurts range in two opposite ways: it absorbs acoustic energy, and it backscatters it. Absorption reduces the signal that comes back from far bins, while strong backscatter from suspended particles raises the noise floor and can make the water look uniformly bright.
What actually happens in a muddy river:
- Profiling range shrinks, often well before the nominal maximum, especially at higher frequencies.
- Bottom tracking degrades over soft, low-reflectivity beds, so boat speed may need a GPS reference.
- Apparent velocity can drift where the return is dominated by particles rather than by well-defined scatterers.
Countermeasures worth testing, in order of cost: drop to a lower frequency band (300 kHz or 75 kHz instead of 600 kHz), reduce the profiling cell size only if signal-to-noise allows, increase ensemble averaging, and cross-check with an independent measurement (sediment sampling or an optical turbidity sensor) so you know the profile is not simply attenuated.
Related: 300 kHz systems for turbid estuaries and the full instrument list.