欢迎!

分享和讨论最佳内容和新营销理念,打造专业形象,共同成为更好的营销人员。

注册

只限注册用戶才可与社群互动。
此问题已终结
27 查看

Bottom tracking and water profiling answer two different questions, and most river surveys need both.

Use bottom tracking when you need the boat speed over ground for discharge calculation: the ADCP locks onto the bed and reports velocity relative to it, so you do not depend on GPS. It is the standard choice for moving-boat discharge measurement, provided the bed is reflective enough and the water is not so deep that the bottom return is lost.

Use water profiling when you need the velocity structure of the water column itself: shear, stratification, backflow near the bed, or tidal reversal. Here the reference is the instrument, so any movement of the platform must be removed separately by GPS or by bottom tracking.

In practice: profile continuously, keep bottom tracking on where the bed is trackable, and log the bottom-track validity flag. Where bottom tracking drops out (soft mud, very deep water, high sediment), fall back to GPS over ground and post-process.

Related reading: application notes on river and coastal deployments and the ADCP product family overview.

形象
丢弃