欢迎!

分享和讨论最佳内容和新营销理念,打造专业形象,共同成为更好的营销人员。

注册

只限注册用戶才可与社群互动。
此问题已终结
28 查看

Frequency trades range against resolution and against sensitivity to sediment. The rule of thumb is simple: higher frequency for shallow, high-resolution work; lower frequency for deep water and turbid water.

Rough bands used in practice:

  • 600 kHz and above: shallow rivers, estuaries, harbours, a few metres to roughly 20 m; small cells, fine vertical resolution, but short range and heavy loss in sediment-laden water.
  • 300 kHz: the general-purpose band for coastal and estuarine work; a workable compromise between range and cell size.
  • 75 to 150 kHz: deeper coastal and shelf work, longer range, coarser cells.
  • 38 kHz: deep water and long-range profiling, where reach matters more than vertical detail.

The choice is driven by the site, not by the datasheet maximum: check the actual depth, the suspended-sediment load, and the cell size your discharge computation needs. A 600 kHz instrument that reaches 8 m in a muddy river is the right answer for an 8 m muddy river, and the wrong one for a 40 m estuary.

See 600 kHz systems, 300 kHz systems and 38 kHz long-range systems.

形象
丢弃