Range is set by the link budget, and in water the dominant term is frequency-dependent absorption, not the transmitter power you can buy.
The four limits, in the order they usually bite:
- Absorption. Seawater attenuates sound strongly, and the loss rises steeply with frequency. Doubling the frequency can cut usable range by a large factor, which is why long-range links use low carriers and accept low data rates.
- Ambient noise. Shipping, wind, rain and biologics raise the noise floor; the receiver's usable signal-to-noise ratio, not the source level alone, decides the link.
- Multipath. In shallow water the same transmission arrives many times with different delays. Beyond a certain range the delay spread exceeds the symbol period and the link fails unless the receiver equalises or the waveform carries guard time.
- Platform and geometry. A near-surface link suffers surface reflection and bubble loss; a link across a thermocline suffers refraction and shadow zones.
Practical consequence: specify range and data rate together. A 1 km link at a few hundred bits per second and a 100 m link at tens of kilobits per second are different products, not different settings of the same product.
Related: high-rate modem configurations and deployment reports with measured ranges.