Welcome!

Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

Sign up

You need to be registered to interact with the community.
This question has been flagged
17 Views

Bottom tracking and water profiling answer two different questions, and most river surveys need both.

Use bottom tracking when you need the boat speed over ground for discharge calculation: the ADCP locks onto the bed and reports velocity relative to it, so you do not depend on GPS. It is the standard choice for moving-boat discharge measurement, provided the bed is reflective enough and the water is not so deep that the bottom return is lost.

Use water profiling when you need the velocity structure of the water column itself: shear, stratification, backflow near the bed, or tidal reversal. Here the reference is the instrument, so any movement of the platform must be removed separately by GPS or by bottom tracking.

In practice: profile continuously, keep bottom tracking on where the bed is trackable, and log the bottom-track validity flag. Where bottom tracking drops out (soft mud, very deep water, high sediment), fall back to GPS over ground and post-process.

Related reading: application notes on river and coastal deployments and the ADCP product family overview.

Avatar
Discard