Home | Digital Hydrophones
Digital Hydrophones
DH Series Self-contained Digital Hydrophones | Passive Underwater Acoustic Recorders
Four optimized variants for ultra-low frequency, general broadband, high-frequency and long-endurance missions. Synchronized array capable, Ethernet & RS485 interface for marine research, offshore EIA and bioacoustics.
DH Series consists of self-contained digital hydrophones integrating acoustic sensing, 24-bit ADC, onboard storage and power management. All models support online streaming, continuous recording, timer trigger and synchronized multi-unit array acquisition.
Four variants are optimized for different underwater acoustic missions: ultra-low frequency baseline monitoring, general deep-sea broadband recording, high-frequency odontocete bioacoustics and ultra-long endurance unmanned deployment. Frequency coverage from 0.1 Hz up to 150 kHz, depth rating from 500m to 6000m. Widely adopted by research institutes, offshore EIA contractors, seabed observatory programs and marine engineering teams for passive acoustic monitoring.
→ VIEW COMPARISON TABLE → Request a quote
Quick Selection Guide
🔍 Subsea geology, infrasound & long-period low-frequency baseline → DH-LN50 (0.1Hz~50kHz, low self-noise, 6000m)
🔍 General deep-sea monitoring, low noise priority → DH-LN100 (10Hz~100kHz, balanced broadband, 6000m)
🔍 Dolphin & toothed whale clicks, coastal high-frequency impulsive noise → DH-LN150 (20Hz~150kHz, high sensitivity, 500m)
🔍 Minimize vessel trips, long-term deep-sea unmanned recording → DH-UN100 (10Hz~100kHz, wide sampling rate, up to 150h, 6000m)
DH-LN50
0.1 Hz~50 kHz | 27 dB self-noise @1kHz | 6000m depth
Ultra-low frequency hydrophone for subsea geology, infrasound and long-term ambient noise baseline

DH-LN100
10 Hz~100 kHz | Low noise floor | 6000m depth
General-purpose low-noise broadband hydrophone for deep-sea ambient noise & bioacoustics

DH-LN150
20 Hz~150 kHz | -180dB high sensitivity | 500m depth
High-frequency hydrophone optimized for odontocete echolocation clicks and coastal impulsive noise

DH-UN100
1.95k~500k sps adjustable | Up to 150h runtime | 6000m depth
Long-endurance hydrophone with flexible sampling rates for extended deep-sea deployment

Common Advantages of DH Series
✅ Unified firmware & synchronized acquisition, mixed-model array supported
✅ Dual interface: Ethernet real-time stream + RS485 configuration
✅ 24-bit ADC, 140dB dynamic range for faint and impulsive signals
✅ DC10~18V input, compatible with mooring & buoy power systems
✅ Custom OEM: underwater connectors, cables, acquisition & post-processing software
FAQ
Yes, mixed DH-LN50 / DH-LN100 / DH-LN150 / DH-UN100 synchronized array is available for multi-band acoustic experiments. Timing specification sheet available.
Yes for all models. Real-time Ethernet streaming with local raw data backup.
Default setting stops recording to preserve raw data. Circular recording can be enabled on request.
Calibration reports available for research, EIA and tender projects.
Focus on required frequency range, deployment depth and mission duration. Send your project brief for free engineering recommendation.
Contact Us for Technical Proposal & Quotation
Need product selection advice, array synchronization solution, custom modification or tender documents? Send us your project specifications, deployment environment and frequency requirements. Our underwater acoustic engineers will reply with tailored solution and formal quotation promptly. e planet a better place.