Welcome!

Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

Sign up

You need to be registered to interact with the community.
This question has been flagged
18 Views

Frequency trades range against resolution and against sensitivity to sediment. The rule of thumb is simple: higher frequency for shallow, high-resolution work; lower frequency for deep water and turbid water.

Rough bands used in practice:

  • 600 kHz and above: shallow rivers, estuaries, harbours, a few metres to roughly 20 m; small cells, fine vertical resolution, but short range and heavy loss in sediment-laden water.
  • 300 kHz: the general-purpose band for coastal and estuarine work; a workable compromise between range and cell size.
  • 75 to 150 kHz: deeper coastal and shelf work, longer range, coarser cells.
  • 38 kHz: deep water and long-range profiling, where reach matters more than vertical detail.

The choice is driven by the site, not by the datasheet maximum: check the actual depth, the suspended-sediment load, and the cell size your discharge computation needs. A 600 kHz instrument that reaches 8 m in a muddy river is the right answer for an 8 m muddy river, and the wrong one for a 40 m estuary.

See 600 kHz systems, 300 kHz systems and 38 kHz long-range systems.

Avatar
Discard